Rockboard Flat MIDI Cable 60cm Black

155

MIDI Cable

  • Flat MIDI cable with a rectangular profile
  • Compact and super-flat angled plugs
  • Flexible copper conductor 5 x 7 x 0.12 mm
  • Suitable for use with clock/SYNC functionality and phantom power
  • Max. nominal current 1 A
  • Exterior insulation: PVC
  • Angled 5-pin DIN connector
  • Working temperature -20°C to +60°C
  • External dimensions of the cable (W x H): 6.5 x 3.5 mm (rectangular)
  • External dimensions of the plugs: (L x W x H): 33 x 15 x 10 mm
  • Length: 60 cm (23 5/8")
  • Colour: Black
Available since December 2017
Item number 426489
Sales Unit 1 piece(s)
Colour Black
Length 0,6 m
Connector from DIN 5-pin (MIDI) male
Connector from DIN 5-pin (MIDI) male
Plug out DIN 5-pin (MIDI) male
47 kr
Including VAT; Excluding kr200 shipping
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

155 Customer ratings

4.4 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

quality

74 Reviews

BD
Great concept, poor realisation
Black Dog Bob 15.04.2019
I needed to connect four devices on my guitar FX pedal board via MIDI. Space was at a premium, and I wanted all the power, audio and MIDI cabling to be tidily out of sight underneath the board.
I thought I'd found the perfect solution when I came across these right-angled MIDI connectors - with very flat profile plugs enabling the cable to drop straight down from the devices, taking up no valuable space.
I would have thought this sort of application was exactly what this product was intended for.
In which case, why on Earth have the pins been put at exactly the angle that renders the product useless for this purpose?!
MIDI ports on devices are always closely grouped. The five pin holes are always at the bottom or top of the port. The pins on this product are placed such that the flat section of the plug lies parallel to the device, rather than perpendicular. This inevitably means that it lies across, and blocks, the adjacent MIDI port.
This is a fundamental design flaw, in my opinion - I really can't see a use for this product in its current format.
The product is well-made, but if you need to use more than one MIDI port on your device, give this one a swerve.
quality
10
1
Report

Report

R
Not so small
Rivendell 03.10.2022
They are low profile but you won't save space because the bending makes the connector to occupy too much space and it cover the other MIDI port on a big strymon pedal. If you switch it it can put some tension on the dc cable on the other side of the pedal.

Buy it if you prefer to save space in one direction but you don't mind to occupy another port.
Otherwise it's better to have a straight cable, at least you can connect all the cables you need to the pedal... In this case Thomann's got a lot of alternatives
quality
0
0
Report

Report

j
So glad i found this
jrakus 30.09.2020
I'm happy I found this. The angle is perfect for what I need. I use it to connect Line6 M5 to a midi switch. The quality is good. If you're not sure which length to get 30cm or 60cm go for the longer one! - you can easily tie the remainder in a loop - there I helped you decide! :).

For some this cable might be a problem because it can cover other inputs on your gear.
quality
1
0
Report

Report

K
Nice quality, be sure about the angle.
Koopa 19.11.2020
Very nice quality cable, does the job. Only thing that got me was the angle. The DIN-connector position follows the cord, which will block nearby MIDI ports.
quality
1
0
Report

Report