DAP-Audio IMIX-7.3

44

7-Channel Installation Mixer

  • 3 Zones
  • Input channels: 2x microphone (XLR / jack combined), 11x Line (RCA), 2x Phono (RCA), 1x Phone (3.5mm jack)
  • Outputs: 3x master balanced (XLR), 1x REC (RCA), 1x headphone (6.3 mm jack)
  • Master EQ
  • Format: 19"/ 2U
  • Dimensions: 481 x 95 x 88 mm
  • Weight: 2.8 kg
Available since February 2018
Item number 433599
Sales Unit 1 piece(s)
simultaneously used channels 7
Mic-In 2
Stereo-In 11
Master Out XLR
Pre Aux max. 0
PC-Interface No
Multitrack-Recording No
USB/SD Direct Record No
Effect Processor No
USB Play No
Bluetooth Play No
Zones 3
19" Rack Compatible 1
Height 89 mm
Width 483 mm
Depth 89 mm
Mono Input Channels 2
Stereo Input Channels 11
altezza 89 mm
Weight 3,4 kg
Number of Outputs 3
Parallel usable Channels 7
Mic Ins 2
Mono Line-in 0
Mono Line Ins 0
Stereo Ins 11
Hi-Z Input 0
Phantompower No
Phantom Power No
Aux Ways 0
Number of Pre Aux max. 0
PC Interface No
Audio Interface Input 0
Audio Interface Output 0
USB/SD Direkt Record No
Rec Out (Analog) 1
PFL 1
Lamp Connector No
Racklight Connector No
Foot Switch No
Foot switch No
Matrix Mixer 1
19" Rackmount Yes
Rackmount Yes
110V Power Supply No
Case Thomann No
Case Thon No
Bag No
Show more
4.444 kr
Free shipping incl. VAT
In stock
In stock

This product is in stock and can be shipped immediately.

Standard Delivery Times
1

44 Customer ratings

4.5 / 5

You have to be logged in to rate products.

Note: To prevent ratings from being based on hearsay, smattering or surreptitious advertising we only allow ratings from real users on our website, who have bought the equipment from us.

After logging in you will also find all items you can rate under rate products in the customer centre.

handling

features

sound

quality

28 Reviews

J
Three useful channels, for speakers and an induction loop
Johnf52 08.08.2020
As an installer, I am frequently required to generate a feed for a hearing assist induction loop as well as speakers circuits. I have now purchased two of these units and a third may be on the way. The format usually ends up by being something like Zone1: front speakers, Zone2: rear speakers (if a large hall) or lobby, or separate room and Zone3 : The loop.

For this purpose, this unit is absolutely ideal. I would say a couple of things though.

The two mic channels which have parallel inputs on front and rear (nice touch, if you've got a rack mounted radio receiver to plug in with balanced O/P) should be the channels with faders and the music inputs, the ones with rotaries. In this vein, the three Outputs would be better with faders for Volume, or at least a bigger knob to differentiate from the tone controls. (In an installed situation, music sources tend to be "static". Its the mics that are more likely to vary and benefit from a fader.)

To my mind the fact that you can have 10 inputs for the 5 phono input channels is way too many for this device, the A/B input choice is unnecessarily complicated , something I cant see many people using (Who has that many phono terminated devices to plug in. A tablet, a phone, a laptop, a CD player and a spare?. Most folk would probably use the same dangling 3.5mm jack lead for the first three anyway)

The push button, illuminated zone selectors are great, particularly for choosing exactly what gets fed into the hearing loop, but the rubbery buttons, not so. The machine tolerances seem a little tight and on one unit I bought, I had to (very carefully!!) file the paint off the inner edges of the hole so the rubber wouldn't bind. It was a small fix, but annoying and I didn't want to have to send it back just for that. Solid switches could still have LED illumination, or use transparent perspex.
The rubber buttons just dont feel nice!
There could be an improvement in headroom (gain) as when used with a tablet and a phone, with the source volume flat out, the gains had to be turned up full to get a reasonable output (and bargraph signal) out of the the three "Masters"

All this being said, its a tidy and useful unit, fits nicely into a wall mounted rack frame that can then have its door locked and if they got rid of the unnecessary alternate inputs and switches etc they could probably shave a few pounds off the price and make it even more attractive.

It sounds like I have a down on this unit but I dont. For the price it is very good, but with a little extra attention to detail, it could be outstanding!
handling
features
sound
quality
2
0
Report

Report

m
Easy mini home studio routing
markkus 30.06.2021
I use this unit in my mostly DAW-less mini home studio. The in total three masters come in very handy and are worth the slight price lift from the IMIX 7.1. No hum or noise, even with multiple masters/ins activated at the same time. The sliders could been a bit stiffer, they move with the slightest touch, I have no complaints regarding the buttons or knobs.
The flexibility this product offers me is great, I use one IMIX master channels with a mixer recorder, to expand and make routing easier (e.g. effects processing). One master is used for my sampler, which can now also be easily be used as an effects unit for all the line ins. The other Master is used for my hifi system.
The panel is easy to use, routing is very intuitive and flexible, with gain and volume on line ins and master channels with additional tone adjustments and vu-leds are usefull. I've yet to test the Mic ports, but I have other pre-amp options for those. One gripe could be that there are mostly phono line inserts, I don't care about this, most of my connected synths only have line-outs. I also did not use the multiple line selector button for switching to another connected device on the same channel, but cloud see the advantage not having to plug/un-plug, they are exclusive to each other so only one can be used at a time.
Of course I could have bought a bigger mixer/MTR with a ton of routing options, but that would have been too intimidating for me to start my step-by-step journey and learning process.
handling
features
sound
quality
0
0
Report

Report

A
amazin
Alandaluz 16.03.2024
amazing product, unpararell sound (and i know lots of these type of equipments), versatile and independent outputs with several levels of signal (great to drive high input levels amplifiiers)
handling
features
sound
quality
0
0
Report

Report

google translate de
Unfortunately there was an error. Please try again later.
W
Durchdachter Mixer mit schönen Features
Werner115 17.04.2018
Der IMIX-7.3 ist zunächst einmal ein Installationsmixer mit 7 Eingängen, - zwei Mikrofoneingänge, 2 stereo-Lineeingänge welche auch auf Phono umgeschaltet werden können, und 3 weitere stereo- Lineeingänge.
Somit scheinbar nichts Besonderes.
Die wohldurchdachte Konstruktion des IMIX erschließt sich erst beim zweiten- bzw dritten Hinsehen.
So besitzt der IMIX drei Stereoausgänge, auf diese jeder Eingang wahlweise geroutet werden kann,- auch parallel, - und natürlich rückwirkungsfrei.
Die drei Ausgänge sind sowohl symmetrisch auf XLR Buchse,- als auch unsymmetrisch auf Klinkenbuchse verfügbar, - umschaltbar 0,7Volt oder 1,55 Volt Pegel.
Drei Stereo-LED Anzeigen geben permanent Auskunft über die momentanen Pegelverhältnisse auf den drei Ausgängen.
Außerdem verfügt jeder Ausgang über den obligatorischen Summenregler, und eine Dreiband- Klangregelung auf der Frontplatte.
Die 5 Phono/ Lineeingänge besitzen auf der Rückseite jeweils Gainregler, welche mit einem Schraubendreher eingestellt,- und so gegen unbeabsichtigtes Verstellen gesichert sind.
Alle 5 Lineeingänge besitzen jeweils zwei paar Eingangsbuchsen,- diese können von der Frontseite über einen Wahlschalter ausgewählt werden.
So können theoretisch 13 Signale ( 2x Mic, 10x Line Stereo, und ein zusätzlicher AUX Stereo) gleichzeitig angeschlossen werden.
Auch eine Peak- LED pro Line in ist obligatorisch.
Ein Schmankerl bieten die zwei Mikrofoneingänge.
Außer dem Pegelregler verfügen sie auch über eine Dreiband- Klangregelung ? und können beliebig auf die drei Ausgänge geroutet werden.
Aktiviert man die Talkover Taste, werden die Mikrofonsignale auf die angewählten Ausgänge gemischt, während das Signal der restlichen Eingänge um einen einstellbaren Wert abgesenkt werden.
Auch die Rückstelldauer auf den Ursprungspegel ist mittels Poti einstellbar.

Sowohl das nur 9 cm tiefe 19 Zoll Gehäuse, als auch der gesamte Aufbau machen einen guten und robusten Eindruck.
Alle Schalter schalten präzise und knackfrei, - allein die Mikrofoneingänge könnten etwas empfindlicher sein.

Der IMIX ist wohl in erster Linie für ELA- Zwecke konzipiert,- wird bei mir aber als Monitorcontroller für den Aufnahmeraum zweckentfremdet.
Alle Signale, die ich in den Aufnahmeraum einspielen muss, liegen am IMIX an, - dank der drei unabhängigen Ausgänge kann ich sie beliebig auf Lautsprecher und/oder Kopfhörer routen, habe dank der LED- Ketten eine Kontrolle über die jeweiligen Lautstärken, - und dank der gut funktionierenden Talkoverschaltung kann ich mittels einfachem Standmikrofon mit Sprechtaste alle Ausgänge gleichzeitig ansprechen.

Fazit
Der IMIX ist ganz sicher kein highend Mischer, - deckt aber in meinem Fall exakt die Funktionen ab, die ich schon immer günstig haben wollte.
Wenns ihn nicht gegeben hätte, hätte ich eigens für meine Zwecke solch ein Gerät konzipiert und gebaut.
Der IMIX bietet für wenig Geld ein solides Gerät mit erstaunlich vielen Variationsmöglichkeiten.
handling
features
sound
quality
6
0
Report

Report

YouTube on this topic